Epson WorkForce AL-MX300DN - Manual (Page 170)

To clear this error, select Clear Warning from Reset Menu in the Common Settings menu. See
“Accessing the each menu” on page 126 for instructions.
Clear Paper Jam XXXX
The location where the paper jam occurred is displayed at XXXX. XXXX indicates the location of the
error.
If a paper jam occurs at two or more locations simultaneously, the corresponding multiple locations
are displayed.
For details about clearing paper jams, see “Clearing Jammed Paper” on page 205.
Close ADF Cover
The ADF cover is not closed securely. Open the cover once, and then close it.
Close Cover wwww
The specified cover (wwww) does not close securely. Open the cover once, then close it.
Also, this warning message may appear when the photoconductor is not installed on the printer.
Collate Disabled
Printing by specifying the number of copies is no longer possible due to a lack of memory (RAM). If
this error occurs, print only one copy at a time.
To clear this error, select Clear Warning from Reset Menu in the Common Settings menu. See
“Accessing the each menu” on page 126 for instructions.
Correct time using Time Setting
The current time setting is reset because you did not connect the power cord for a long time. To clear
this warning message, select Time Setting from Setup Menu and specify the current date and time.
Communication Error
Scanning is canceled when the computer is turned off after you select a computer in which to save data
for WSD scan, or the connection was stopped because the LAN cable was unplugged.
Connecting to E-mail Server
AL-MX300 Series User's Guide
Using the Control Panel 170