Epson WorkForce AL-MX300DN - Manual (Page 78)

2. Connect a USB memory to the USB Host interface of the printer.
The printer searches the files in the USB memory. If any supported files are detected, the control
panel menu appears automatically.
Note:
If Can’t Print Files is displayed on the control panel, printable files were not detected in the
USB memory.
3. Press the F2 button to select ImgFile.
4. Press the u or d button to select the file, then press the OK button. You can select multiple files at
the same time.
5. Make appropriate settings as described below.
Tab Item Settings (default in bold)
Basic
Setting Paper A4, LT, LGL
Layout None, 2 in 1, 4 in 1, 8 in 1
Duplex Off (Simplex), Duplex Long, Duplex Short
Advanced FileName On, Off
6. Specify the number of copies using the numeric keypad on the control panel.
7. Press the Start button to start printing.
AL-MX300 Series User's Guide
Printing 78