Epson WorkForce AL-MX300DN User Manual
Page 212
Advertising
6. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
!
Caution:
Be careful not to touch the rollers in the fuser unit, they may be very hot.
c
Important:
❏ Do not expose the photoconductor unit to sunlight at all and avoid exposing it to room light
for more than three minutes.
❏ Do not touch the transfer roller on the transfer unit to avoid damaging it.
7. Unlock the release levers on the rear of the fuser unit.
AL-MX300 Series User's Guide
Troubleshooting 212
Advertising