Epson WorkForce AL-MX300DN - Manual (Page 243)

❏ Select a lower resolution setting. See “Scanning in Office Mode” on page 89 or “Scanning in
Professional Mode” on page 90 for instructions.
Note:
You cannot remove ripple patterns when you are scanning using a resolution higher than 600 dpi.
Scanned colors differ from the original colors
❏ Make sure the Image Type setting is correct. See “Scanning in Professional Mode” on page 90 for
instructions.
❏ Click Configuration, select the Color tab, and change the Display Gamma setting to match your
output device, such as a monitor or printer, in the Color menu. See Epson Scan Help for details.
❏ Adjust the Auto Exposure Type setting in Professional Mode. Also try selecting a different Tone
Correction setting. See “Image Adjustment Features” on page 93 for details.
❏ Click Configuration, select the Color tab, and select Color Control and Continuous auto
exposure in the Color menu. See Epson Scan Help for details.
❏ Click Configuration, select the Color tab, and click Recommended Value to return the Auto
Exposure Level setting to the default. See Epson Scan Help for details.
❏ Make sure to enable the Embed ICC Profile setting. In the File Save Settings window, select JPEG
or TIFF as the Type setting. Click Options, then select the Embed ICC Profile check box. To
access the File Save Settings window, see “Scanning in Office Mode” on page 89 or “Scanning in
Professional Mode” on page 90.
❏ Check the color matching and color management capabilities of your computer, display adapter,
and software. Some computers can change the palette of colors on your screen. See your software
and hardware manuals for details.
❏ Windows: Use the color management system for your computer, ICM. Add a color profile that
matches your monitor to improve on-screen color matching. Exact color matching is very
difficult. Check your software and monitor documentation for information on color matching
and calibration.
❏ Mac OS X: Use the color management system for your computer, ColorSync. Exact color
matching is very difficult. Check your software and monitor documentation for information on
color matching and calibration.
❏ Printed colors can never exactly match the colors on your monitor because printers and monitors
use different color systems: monitors use RGB (red, green, and blue) and printers typically use
CMYK (cyan, magenta, yellow, and black).
AL-MX300 Series User's Guide
Troubleshooting 243