Control panel, Dn model – Epson WorkForce AL-MX300DN User Manual
Page 28
Control panel
DN model
a
Mode buttons/LEDs (Green)
Use these buttons to switch to the corresponding mode.
b
Job Memory button
Use this button to register frequently used settings for Copy mode and Scan
mode or to call up the settings.
c
Setting button
Use this button to switch to the setup mode.
d
LCD panel
Displays printer status messages and control panel menu settings.
e
OK button
Use these buttons to access the control panel menus, where you can make
printer settings and check the status of consumable products. For instructions
on how to use these buttons, see “Using the Control Panel” on page 125.
Up button
Right button
Down button
Left button
f
Address-book button
Use this button to display the information registered in the address list.
g
Power Saving button/LED
(Green)
Use this button to enter the power saving mode. This mode is canceled when
the button is pressed again. This button lights up when the printer is in the sleep
mode (the deep sleep mode).
For EU model, the printer has a power off mode which saves more power
consumption as almost all functions are not available. For more details about
the power off mode, see “Energy Saver Menu” on page 139.
h
Stop button
When the printer is printing, pressing this button stops the printing.
AL-MX300 Series User's Guide
Getting to Know Your Printer 28