Epson WorkForce AL-MX300DN User Manual
Page 207
Advertising
!
Caution:
Be careful not to touch the rollers in the fuser unit, they may be very hot.
c
Important:
❏ Do not expose the photoconductor unit to sunlight at all and avoid exposing it to room light
for more than three minutes.
❏ Do not touch the transfer roller on the transfer unit to avoid damaging it.
3. Unlock the release levers on the rear of the fuser unit.
4. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
AL-MX300 Series User's Guide
Troubleshooting 207
Advertising