Epson WorkForce AL-MX300DN - Manual (Page 135)

Adjusts the contrast of the LCD panel. Use the u and d buttons to set the contrast between 0 (lowest
contrast) and 15 (highest contrast.)
LCD Backlight
If Auto is selected, the LCD backlight lights. Also, it turns off during Sleep or Deep Sleep mode. If Off
is selected, the LCD backlight is always off.
B/W Reverse Disp.
Enables you to reverse the color of the LCD panel.
Sound Volume
Specifies the volume of sound produced when a button is pressed, fax or scan operation is completed,
or an error occurs.
RAM Disk
Specifies the amount of RAM to be used for the Reserve Job function.
Convert to Simplex
In the duplex printing mode, specifies whether to print the last page of a job in one side printing mode.
Setting Odd Page or 1 Page can prevent the last page from being printed on an unexpected page
when you are printing on preprinted paper or hole-punched paper.
Odd Page : 1-page jobs or the last page of a job with an odd number of pages are printed in one side
printing mode.
1 Page
: 1-page jobs are printed in one side printing mode.
Off : The last page of all jobs (including 1-page jobs or jobs with an odd number of pages) is printed in
duplex printing mode.
Confirm Media Type
Displays a message when the paper type in the tray selected for printing is different from that selected
on Paper Type in the printer driver.
Job Information
AL-MX300 Series User's Guide
Using the Control Panel 135