Epson WorkForce AL-MX300DN - Manual (Page 53)

Note:
❏ The area with a width of maximum 1.0 mm from the horizontal edge and 1.0 mm from the
vertical edge is not scanned.
1. Maximum unreadable area of 1.0 mm
2. Maximum unreadable area of 1.0 mm
2
1
❏ Always keep the document table clean.
3. Close the document cover gently so that the original does not move.
Note:
❏ Do not leave documents, such as photographs, on the document table for an extended period of
time because they may stick to the glass.
❏ Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy
and out of focus. Also be sure to close the document cover to prevent interference from external
light.
Setting your originals into the Auto Document Feeder
Follow the steps below to load documents in the Auto Document Feeder.
AL-MX300 Series User's Guide
Paper Handling 53