Epson WorkForce AL-MX300DN - Manual (Page 146)

Height
Specifies the default font height if the font is scalable and proportional. You can select from 4.00 to
999.75
points, in 0.25-point increments. This item may not appear depending on the FontSource or
Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in FontSource and Font Number is not
available in the new SymSet setting, the FontSource and the Font Number settings are automatically
replaced with the default value, IBM-US.
Form
Selects the number of lines for the selected paper size and orientation. This also causes a line spacing
(VMI) change, and the new VMI value is stored in the printer. This means that later changes in the
Page Size
or Orientation settings cause changes in the Form value, based on the stored VMI.
CR Function, LF Function
These functions are included for users of particular operating systems, such as UNIX.
Tray Assign
Changes the assignment for the paper source select command. When 4 is selected, the commands are
set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as compatible
with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands are set as compatible
with the HP LaserJet 5S.
PS3 Menu
Item Settings (default in bold)
Error Sheet Off, On
Image Protect Off, On
Binary Off, On
Text Detection Off, On
PDF Page Size Auto, A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, DL, C6
AL-MX300 Series User's Guide
Using the Control Panel 146