Epson WorkForce AL-MX300DN - Manual (Page 82)

3. Press the F1 button on the control panel.
4. Connect a USB memory to the USB Host interface of the printer.
Note:
If necessary, specify the desired settings such as Basic Setting, File Setting, and Scan
Setting
. For details about each setting, see “Scan mode menu list” on page 80.
5. Press the Start button.
The printer starts scanning.
Saving scanned data to a shared folder
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 50.
AL-MX300 Series User's Guide
Scanning 82