Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 102)

Publication 1757-IN032B-EN-P - April 2001
1-82 System Software Upgrade Procedures
20. Skip to Step 23 if the Specify Microsoft Excel Directory window
doesn’t appear. Otherwise, click Next to accept the default
directory for Microsoft Excel.
21. Click No in response to the question:
Do you want Microsoft Excel Data Exchange to be allowed to
write to a ProcessLogix Server database?
to disable the Microsoft Excel Data Exchange write option.
22. Skip this step if the Choose ProcessLogix Client Software folder
window doesn’t appear. Otherwise, click Next to accept PlantScape
Client Software as the default Program Folder for the Client
Software.
23. Review the software installation details summarized in the
Confirmation window.
•
If you need to make changes, use the Back button to access any
previous entries.
•
If the details are okay, click Next to begin Client setup. This
takes a few minutes to complete.
ATTENTION
!
We recommend that you answer No to the question:
Do you want Microsoft Excel Data Exchange to be
allowed to write to a ProcessLogix Server database?
If you answer Yes, the write option is enabled and it is
possible for anyone with access to the machine to write
to the Server database.
TIP
If a Read only File Detected message appears during
software installation, check the Don’t display again
checkbox and click Yes to acknowledge the message.