Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 30)

Publication 1757-IN032B-EN-P - April 2001
1-10 System Software Upgrade Procedures
b. Wait for the message RSLinx Service is not running to appear.
Close the dialog box.
5. Skip to Step 9 if NI-FBUS is not running. Otherwise, close the
NI-FBUS configurator.
6. Wait until the FCS shutdown window disappears before
proceeding.
7. Right-click the NI-FBUS 2.3 icon in the taskbar and select Open.
8. Close the NI-FBUS window and click Yes to confirm.
9. Right-click an open space in the taskbar and click Task Manager to
open the Windows NT Task Manager window.
10. Click the Processes tab, scroll through the list box and select any
process with the Image Name of EXCEL.EXE.
11. Click End Process.
12. Close Task Manager.
Stopping the 1784-PCIC(S) devices
After you have installed the 1784-PCIC card and installed the
ProcessLogix R320.0 software, use the following procedure to stop the
PCIC(S) devices.
13. Click Start
⇒
Settings
⇒
Control Panel.
14. Double-click the Devices icon.
15. Select the A-B Virtual Backplane device driver.
16. Click Stop.
17. Click OK to also stop the A-B 1784-PCIC(S) device driver.
18. Close the Devices dialog box.