Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 224)

Publication 1757-IN032B-EN-P - April 2001
6-8 New Functions and Features
1. Run the Windows NT Diagnostics program.
Select Start
⇒
Programs
⇒
Administrative Tools (common)
⇒
Windows NT Diagnostics.
2. Choose the Resources Tab, and click the IRQ button.
Interrupt usage will vary depending on the Hardware installed in your
system. On some configurations, it may be necessary to remove one
option board in order to free up an interrupt for usage with the PCIC
board.
If the board is not able to gain access to an interrupt, you will not be
able to define the driver in the RS-Linx Software.
Server 20 Stations per Server (NT Server)
The number of Stations that can be associated with a ProcessLogix
Server has been increased from 10 to 20 Stations. To support any
number of Stations above 8 (on Redundant Servers) or 10 (on
Standalone Servers) requires the use of Microsoft NT Server software.
Additional Client Access Licenses also need to be purchased with the
NT Server Software to match the number of Stations and Clients
connecting to the Server. Some Stations may need to be de-rated in
13 EtherLink board on some configurations or Stallion Board on some systems.
14 ATAPI, Primary IDE interface, used on some systems.
15 ATAPI, Secondary IDE interface, used on some systems.
Table 6.B Interrupt Usage Table: