Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 182)

Publication 1757-IN032B-EN-P - April 2001
4-18 Additional Redundant Server Procedures
13. Click Start
⇒
Programs
⇒
ProcessLogix Server
⇒
Start-Stop
ProcessLogix Server to call up the ProcessLogix Server dialog box.
a. With the Full Mode version of the dialog box active, click the
System Running option.
b. Click Yes to confirm the action and wait for the Server to
change its state.
c. Close the ProcessLogix Server dialog box.
Configuring Stations in QuickBuilder
1. Click Start
⇒
Programs
⇒
ProcessLogix Server
⇒
Quick Builder.
2. Click the New Project option and click OK.
3. In the Create New Project dialog box, key in >Stations.qdb< in
the File name field and click Save.
4. Wait for the Enable Components dialog box to appear.
a. Under the System/License Details tab, click the down arrow
and select ProcessLogix - R320 from the Server drop-down list.
b. Click OK to accept the default component selections listed
under the Enable Components tab.
c. Wait for Quick Builder to generate the file.
5. Click Edit
⇒
Add Items to call up the Add Item(s) dialog box.
6. Click the down arrow in the Add items field and click Station.
7. Click Static Station selection in the Type list box.
8. Increment the number in the Number of items to Add field to
equal the number of connected Stations. Each Server counts as a
Station.
9. Key in the desired Use name or Prefix for multiple Stations. (For
example, use STN as the prefix with a numeric variable and
starting with the number 0. If the number of Stations to be
added is three, three Stations named STN0, STN1, and STN2 will
be added.)
TIP
To display the “Full Mode” version of the ProcessLogix
Server dialog box, click the icon to the left of
ProcessLogix in the title bar and click
Advanced
⇒
Full Mode. A checkmark will now
appear in front of the Full Mode selection to show
that it is active.