Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 164)

Publication 1757-IN032B-EN-P - April 2001
3-36 Full PC Software Installation Procedures
Verifying ProcessLogix
Client Installation Setting Up a ProcessLogix Client with a Non-redundant Server
Refer to Setting Up a ProcessLogix Client With a Non-redundant
Server on page 1-84.
Setting up a ProcessLogix Client with Redundant Servers
Refer to Setting Up a ProcessLogix Client With Redundant Servers on
page 1-86.
Checking Control Builder Operation and Logging On
Use the following general procedure to log on and check Control Builder
operation on a ProcessLogix Engineering Workstation.
1. Click Start
⇒
Programs
⇒
ProcessLogix Engineering
Tools
⇒
Control Builder.
2. In the Login dialog box, make these entries:
a. Key in >mngr< as the default User Name.
b. Key in >mngr1< as the default Password.
c. Key in the name of the appropriate Server node in the Server
Name field.
3. Click OK.
Creating an Emergency Repair Disk
Refer to Creating an Emergency Repair Disk on page 3-14.