Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 70)

Publication 1757-IN032B-EN-P - April 2001
1-50 System Software Upgrade Procedures
Installing Engineering Tools
1. Engineering Tools is automatically installed. This takes a few
minutes to complete.
Installing PsAxCtl Document EXE
a. Click OK to acknowledge the change directory warning.
b. At the PsAxCtl Document EXE Setup Welcome window,
click OK.
c. Verify that the destination directory is
C:\Honeywell\TPS50\System\Bin.
d. Click the large install button (PC icon).
e. At the Setup complete window, click OK.
Installing CCL Deployment
a. At the Welcome window, click Next.
b. At the CCL Deployment Installation Complete window,
click Finish.
2. At the Engineering Tools Setup Complete window, click Finish.
Migrating the ERDB (on SERVERB only)
ERDB migration only occurs on SERVERB. If you are upgrading
SERVERA, skip to Installing the ProcessLogix Server on page 1-51.
1. Wait while the automatic ERDB migration from R300.1 or R310.0
to R320.0 is executed.
The migration activity appears in a DOS window. This may take
some time to complete, depending on the size of your database.
2. When the ERDB Migration is complete, click OK.
If ERDB Migration fails, refer to Recovering from Failure of an
Automatic ER Database Migration on page 5-8.