Setting up user accounts, Setting up user accounts -23 – Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual
Page 151
Publication 1757-IN032B-EN-P - April 2001
Full PC Software Installation Procedures 3-23
Setting up User Accounts
1. Configure the plx_user, mngr, and erserver accounts.
Refer to Setting Up User Accounts on page 5-27.
Completing ProcessLogix
Install on a Non-Redundant
Server
Moving the RSLinx Activation File
ATTENTION
!
Do not restart the Server.
If you are installing ProcessLogix software on a
Redundant Server pair:
•
Do not restart SERVERA.
•
Return to the beginning of Installing ProcessLogix
Software on a Clean PC on page 3-16 and repeat
for SERVERB.
•
Once you have completed these procedures for
both SERVERA and SERVERB, refer
to Additional Redundant Server Procedures on
page 4-1.
If you are installing ProcessLogix software on a
Non-redundant Server:
•
Continue with the next section, Completing
ProcessLogix Install on a Non-Redundant Server.
IMPORTANT
Complete Step 1 and Step 2 in the following
procedure to determine your current RSLinx version.