Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 99)

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-79
Refer to Installing ProcessLogix Knowledge Builder Software on
page 1-16.
Installing ProcessLogix Engineering Workstation Software
1. Be certain that the current logon account is plx_user.
2. Confirm that the PC’s date and time settings are correct.
3. Insert the ProcessLogix R320.0 software CD into the CD-ROM
drive.
4. Click Start
⇒
Run.
5. Key in this path location in the Open entry field or use Browse to
navigate to the setup.exe file on the CD.
>D: (or your CD-ROM drive letter)\SETUP.EXE<
6. Click OK.
7. Click the ProcessLogix Engineering Workstation option and click
Next.
8. At the ProcessLogix R320.0 Welcome window, click Next.
9. Click Yes to accept the license agreement.
Installing Engineering Tools
10. Engineering Tools is automatically installed. This takes a few
minutes to complete.
TIP
If you do not have a plx_user account, refer
to Creating the plx_user Account on page 3-12.
TIP
If you see a DOS window that asks if you are sure you
want to unload the database, type y and press Enter.