Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 178)

Publication 1757-IN032B-EN-P - April 2001
4-14 Additional Redundant Server Procedures
The replicate window appears:
Created Secondary ERDB Successfully at:
\\severname\Hybrid\System\ER\erdb_b.mdb
5. When the replica creation has completed, click Yes to start the ER
Replicator service.
6. Close DbAdmin.
Making Redundant Hardware File Entries
1. On the SERVERA node, click Start
⇒
Programs
⇒
ProcessLogix
Server
⇒
Start-Stop ProcessLogix Server to call up the ProcessLogix
Server dialog box. Check that the Server is running. Close the
dialog box.
OR
2. On the SERVERB node, click Start
⇒
Programs
⇒
ProcessLogix
Server
⇒
Start-Stop ProcessLogix Server to call up the ProcessLogix
Server dialog box.
TIP
If the File Already Exists window appears, click OK to
replace it with a new replica file.
TIP
To display the “Full Mode” version of the ProcessLogix
Server dialog box, click the icon to the left of
ProcessLogix in the title bar and click
Advanced
⇒
Full Mode. A checkmark will now
appear in front of the Full Mode selection to show
that it is active.