Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 27)

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-7
4. Key in this command in the Open entry field:
>cmd<
and click OK to open the DOS window.
5. At the DOS prompt, key in this command:
>fullbkup<
and press >Enter<
This initiates some file copying and then the backup dialog box
appears. No further interaction is needed until the backup
completes. This process may take considerable time to complete,
depending on the Server.
6. When the backup completes, remove the backup tape from the tape
drive.
7. Exit the DOS window.
TIP
For more information on backup procedures, refer
to the Windows documentation and/or online help
that accompanied your system.
TIP
You may see errors such as: “file xxx skipped”.
These errors are normal and will not affect the
validity of your backup tape.