Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 145)

Publication 1757-IN032B-EN-P - April 2001
Full PC Software Installation Procedures 3-17
Installing Server Software
Use the following procedure to install these ProcessLogix software
components on a clean PC in succession.
•
RSLinx OEM 2.2
•
Engineering Tools
•
Client/Server (Display Builder, Station, and Server)
1. Logon to NT as plx_user (or your default user), using the account
already set up.
2. Close all running applications.
3. Insert the ProcessLogix R320.0 software CD into the CD-ROM
drive.
4. Click Start
⇒
Run.
5. Key in this path location in the Open entry field or use Browse to
navigate to the setup.exe file on the CD.
>D: (or your CD-ROM drive letter)\SETUP.EXE<
6. Click OK to launch the software setup application.
7. Click the ProcessLogix Server option and click Next.
8. At the ProcessLogix R320.0 Welcome window, click Next.
9. Click Yes to accept the license agreement.
10. At the Before installing window, click Yes.
TIP
Refer to Creating the plx_user Account on
page 5-27 if you need to create the plx_user
account.
IMPORTANT
You must have either a PCIC or Ethernet card installed
in your ProcessLogix Server to install R320.0.