Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 43)

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-23
d. Click the large install button (PC icon).
e. At the Setup complete window, click OK.
Installing CCL Deployment
a. At the Welcome window, click Next.
b. At the CCL Deployment Installation Complete window,
click Finish.
2. At the Engineering Tools Setup Complete window, click Finish.
Migrating the ERDB
1. Wait while the automatic ERDB migration from R300.1 or R310.0
to R320.0 is executed.
The migration activity appears in a DOS window. This may take
some time to complete, depending on the size of your database.
2. When the ERDB Migration is complete, click OK.
If ERDB Migration fails, refer to refer to Recovering from Failure
of an Automatic ER Database Migration on page 5-8.
Installing the ProcessLogix Server
1. At the Welcome to ProcessLogix Server Setup window, click Next.
2. Click Yes in the Question box to upgrade the ProcessLogix Server
to R320.0.
3. Click Yes to replace the detected versions of Display Builder,
Quick Builder, and Station.