Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 132)

Publication 1757-IN032B-EN-P - April 2001
3-4 Full PC Software Installation Procedures
Setting Up Windows NT
Use the following procedure to continue with the Windows NT
installation started in the previous procedure.
1. Wait for your PC to reboot and start the Setup Wizard.
2. When prompted, insert the Windows NT 4.0 CD into the
CD-ROM drive.
3. Select Custom from the setup options list and click Next.
The Custom setup lets you override default settings for the SCSI
adapters, CD-ROM drives, video displays, virtual memory and
others, as required.
4. Key in the Name and Organization of the registered user and click
Next.
5. Key in the Product ID and click Next.
6. Key in a lower case computer name for your PC.
The base name cannot contain more than 13 alphanumeric
characters and must contain no spaces. The following naming
conventions are required for given ProcessLogix system
architectures.
•
For non-redundant Server, be certain that the name does not end
in the letter “A” or “B”. The suggested name is PLX1.
•
For redundant Servers, append a letter to the base name to
identify the PC’s function in the system architecture beginning
with the letters A and B for the Primary and Secondary Servers,
respectively.
For example, use the name PLX1A for the Primary Server
(SERVERA) and PLX1B for the Secondary Server (SERVERB).
•
For a ProcessLogix Client, the suggested name is STNx where x
is the Client number. In redundant Server systems, you may
want to use the previous naming convention for redundant
Servers.
IMPORTANT
Be certain that the caps lock is not enabled. The
computer name must be typed in lower case. You will
notice that when you type, the computer name displays
in capital letters.