Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 163)

Publication 1757-IN032B-EN-P - April 2001
Full PC Software Installation Procedures 3-35
Creating the Emergency Repair Disk
Refer to Creating an Emergency Repair Disk on page 3-14.
Installing ProcessLogix
Client Software
on a Clean PC Installing Windows NT or Windows 9x Operating System
Checking Required System Settings
If you are installing on a system with Windows NT, refer to Checking
Required System Settings on page 3-13.
Installing ProcessLogix Client software
Refer to Installing ProcessLogix Client Software on page 1-73.
•
If you are installing the Operator system, refer to Installing
ProcessLogix Operator Workstation Software on page 1-74.
•
If you are installing the Engineering system, refer to Installing
ProcessLogix Engineering Workstation Software on page 1-79.
To install: Refer to:
Windows NT on page 3-1
Windows 95 or 98 Knowledge Builder
Navigate to Knowledge Builder
⇒
Server and Client Installation
Guide
⇒
Installing the Operating System on a Client PC
TIP
To take full advantage of the ProcessLogix security
features, you must install ProcessLogix software on a
Windows NT operating system with NTFS.