Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 208)

Publication 1757-IN032B-EN-P - April 2001
5-22 Supplementary Procedures
Changing the Computer
Name All ProcessLogix Servers and Clients require unique computer names and
IP addresses. If your ProcessLogix system includes multiple Servers
and/or Clients, you will need to change computer names and addresses to
assure their unique identities.
Procedure for Configuring a Non-redundant Server
Changing the Computer Name
Use the following procedure to change the name of your computer.
1. Click Start
⇒
Settings
⇒
Control Panel.
2. Double-click the Network icon to display the Network dialog box.
3. In the Identification tab, click Change.
4. Key in the desired computer name in the Computer Name entry
field.
5. Click OK to initiate the change.
6. Close the Network dialog box and click Yes to restart the PC.
Setting Up a ProcessLogix Client with a Non-redundant Server
Refer to Setting Up a ProcessLogix Client With a Non-redundant Server
on page 1-84. Use this procedure to confirm that any Clients reference
the correct non-redundant Server by computer name or IP address.