Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 214)

Publication 1757-IN032B-EN-P - April 2001
5-28 Supplementary Procedures
Setting up erserver and/or mngr user accounts
1. Close all running applications.
2. Click Start
⇒
Programs
⇒
Administrative Tools (Common)
⇒
User
Manager.
3. Select erserver or mngr users from the Username list. If the erserver
and mngr user accounts are not in the Username list, click
User
⇒
New User.
4. Enter or verify the appropriate information as shown in Table 5.A.
5. Check ONLY the Password Never Expires checkbox.
6. If you are not setting up erserver, go to Step 10. If you are setting
up erserver go to Step 7.
7. Click Groups.
8. If Administrators is not in the Members of List, select
Administrators from the Not Member of List and click Add.
9. Click OK to close the Group Memberships log box.
10. Click OK to close the User Properties dialog box.
11. Close the User Manager window.
Setting Up User Accounts to Logon as a Service
1. Close all running applications.
2. Click Start=>Programs=>Administrative Tools
(Common)=>User Manager.
IMPORTANT
When setting up the eserver and mngr accounts, be
certain that your current NT logon is through an
administrator account, such as plx_user, but not
Administrator and not an engr or mngr account.
IMPORTANT
The user accounts plx_user, mngr, and erserver must
all be configured to logon as a service.