Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 36)

Publication 1757-IN032B-EN-P - April 2001
1-16 System Software Upgrade Procedures
Installing ProcessLogix
Knowledge Builder
Software Knowledge Builder is the software application used to display
ProcessLogix online documentation. Knowledge Builder (KB) requires
several other software applications and Microsoft components to
function properly. These components include:
Since Knowledge Builder is provided on a separate CD, use the following
procedure to install the software and update the online documentation
database.
1. Insert the ProcessLogix R320.0 Knowledge Builder CD into the
CD-ROM drive.
2. Click Start
⇒
Run.
3. Key in this path location in the Open entry field or use Browse to
navigate to the Setup.exe file on the CD.
>D: (or your CD-ROM drive letter)\Knowledge_Builder\Setup.exe<
4. Click OK.
5. Follow the on-screen prompts to load the software.
Knowledge Builder requires
this component: You MUST:
Service Pack 6a for Windows NT
•
refer to Installing Service Pack 6a
for Windows NT 4.0 on page 1-11
Internet Explorer 5.01
•
refer to Installing Internet Explorer
5.01 on page 1-12
Microsoft MDAC 2.1
•
refer to Upgrading Data Access
Components on page 1-13
Adobe Acrobat 4.05
•
refer to Uninstalling Adobe
Acrobat Reader 3.01 on page 1-15
•
Adobe Acrobat 4.05 will be
installed during the Knowledge
Builder install
DCOM95 or 98
•
automatically installed during the
Knowledge Builder install
VB Runtime files
•
automatically installed during the
Knowledge Builder install
ATTENTION
!
Before installing or uninstalling any software
component, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.