Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 14)

Publication 1757-IN032B-EN-P - April 2001
Preface 2
Minimum Hardware
Requirements ProcessLogix Server Software must be installed on a PC that is
specifically qualified. Use of any other PC variations will render the
standard warranty and support agreement null and void.
Please refer to the table below to review the hardware requirements
for a new R320.0 ProcessLogix server or client system. ProcessLogix
Clients require a Windows NT operating system to support the
multiple-user configuration nodes architecture that is possible with
R320.0 ProcessLogix systems See Table 7.C on page 7-4 for minimum
hardware requirements for upgrading an existing system to R320.0.
IMPORTANT
End users purchasing ProcessLogix 1757-PLXSYSKIT
are not eligible for the standard 90 day technical
support, unless the software is installed by personnel
trained specifically for ProcessLogix installation.
Component Description
Base Dell OptiPlex GX200
Processor 800Mhz,Pentium III, 133Mhz Front Side Bus
Integrated Functions 4X AGP Video w/8MB of Memory
Audio, 512KB Cache 10/100 NIC
Mouse Microsoft Intellimouse
Keyboard Quietkey Spacesaver 104-Key, US
System RAM 256MB, ECC PC700, 1 RIMM
CD-ROM 40X SCSI
Floppy Drive 1.44MB, 3.5"
SCSI Controller Adaptec 29160N Controller
Hard Drive 9.1GB Minimum U2W, 10,000 RPM, SCSI
GX1/M, w/Terminated Cable
Tape Drive 10/20 G, SCSI, TR-5, Tape Backup Unit
Network Integrated 3COM
3C90SC with 1 RJ45 connector
I/O Expansion 5 PCI, 2 ISA/PCI shared slots
Software Microsoft Windows NT4.0 (Service Pack 6a), NTFS
All hardware component drivers