Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 97)

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-77
•
If the details are okay, click Next to begin Client setup. This
takes a few minutes to complete.
19. Skip this step if the system does not include Excel Data Exchange.
Otherwise, click Enable Macros when requested.
20. At the Setup Complete window, click the No, I will restart my
computer later option and click Finish.
21. The ProcessLogix Operator Workstation Update is automatically
installed.
22. At the ProcessLogix Setup Complete window, click the No, I will
restart my computer later option and click Finish.
23. Remove the CD.
24. Restart the PC.
25. Go to Verifying ProcessLogix Client Installation on page 1-83.
TIP
If a Read only File Detected message appears during
software installation, check the Don’t display again
checkbox and click Yes to acknowledge the message.
TIP
If a Microsoft Excel dialog box appears, check the Do
not show this dialog again checkbox and click OK.
TIP
In Windows 95/98, if blank DOS windows appear
periodically, simply close the windows to continue.