Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 32)

Publication 1757-IN032B-EN-P - April 2001
1-12 System Software Upgrade Procedures
Installing Internet
Explorer 5.01
For your convenience, we have included Internet Explorer 5.01 on the
ProcessLogix R320.0 software CD. Use the following procedure to install
Internet Explorer 5.01 on a PC with Windows NT.
If installing on a PC with Windows 95 or 98, complete Steps 1 through
4 and then follow on-screen prompts. If you need help, call Rockwell
Automation Technical Support. Refer to Rockwell Automation
Technical Support in the Preface.
1. Insert the ProcessLogix R320.0 software CD into the CD-ROM
drive.
2. Click Start
⇒
Run.
3. Key in this path location in the Open entry field or use Browse to
navigate to the ie5setup.exe file on the CD.
>D: (or your CD-ROM drive letter)\IEXP_5_0_1\ie5setup.exe<
4. Click OK to launch Internet Explorer setup.
5. Accept the license agreement and click Next.
6. Select the Install Now-Typical option and click Next.
7. When installation completes, click Finish.
The PC automatically restarts.
8. Remove the CD.
ATTENTION
!
Before installing or uninstalling any software
component, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.