NewTek TriCaster 8000 - Manual (Page 386)

Page | 370
 Tilt: With SHIFT depressed, tilt the joystick backward-forward.
 Zoom: With SHIFT depressed, twist the joystick clockwise or counter-
clockwise.
 Focus: When Auto is off, and with SHIFT + CTRL both pressed, twist the
joystick clockwise or counter-clockwise.
o Auto Focus toggle: With SHIFT + CTRL held down, press the joystick
button.
 Preset selection: Press CTRL + LIVESET SHOT (1-8) to choose a preset for the
selected camera.
 Press CTRL + RATE (M/E Transition group) to adjust the camera’s Animation
Speed.
Hold down SHIFT and press the top joystick button to update the current PTZ preset
(position, zoom and thumbnail icon).
22.3.14 AIRSEND™ CONTROL
AirSend™ is the software API (application programming interface) providing
network A/V support in NewTek products (see Section 17.6). Various systems and
software (both native and third-party) can take advantage of AirSend to send and
receive control instructions. As one example, NewTek’s own 3Play™ instant replay
natively systems support AirSend.
AirSend commands have pre-assigned to TriCaster 8000CS. The following table lists
control combinations that trigger AirSend operations and provides both a brief
description of each operation and, for reference, the AirSend command invoked.
Control Operation Description AirSend Command
Ctrl + M/E row A (1-
24) Net 1: Store index 1-24 CLIP_STORE INDEX=Net1_1-24
Ctrl + Shift + M/E row
A (1-24) Net 1: Restore index 1-24 CLIP_RESTORE INDEX=Net2_1-24