Yaskawa CIMR-LU Drives - Manual (Page 121)

4 Start-Up Programming & Operation
YASKAWA ELECTRIC TOEP C710616 38F YASKAWA AC Drive L1000A Quick Start Guide 121
S
tart-U
p
Prog
rammin
g
&
Op
er
at
io
n
4
3. Use a pair of diagonal cutters to cut an opening in the connector cover that allows the cable to pass through. The
cable should pass through the connector cover with the cover fastened to the drive.
Figure 56
Figure 63 Reattaching the Connector Cover (1)
4. Slide the connector cover back into place as shown in Figure 64 .
NOTICE: Make sure the cable does not get pinched between the drive and the connector cover, as this could damage the cable.
Figure 57
Figure 64 Reattaching the Connector Cover (2)
Figure 58
Figure 65 Drive and Battery Connection Complete
Cut an opening to allow the
battery cable to pass through.
Connect
to battery.
TOEP_C710616_38F_5_0.book 121 ページ ２０１３年１２月４日 水曜日 午前９時５６分