Yaskawa CIMR-LU Drives - Manual (Page 159)

A Specifications
YASKAWA ELECTRIC TOEP C710616 38F YASKAWA AC Drive L1000A Quick Start Guide 159
S
p
ec
ifi
c
at
ions
A
A Specifications
◆ Three-Phase 200 V Class Drives
Table 55 Power Ratings (Three-Phase 200 V Class)
Item
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Carrier frequency can be set up to 8 kHz while keeping this current rating. Higher carrier frequency settings require derating.
<6> Carrier frequency can be set up to 5 kHz while keeping this current rating. Higher carrier frequency settings require derating.
Specification
CIMR-LU2A 0008 0011 0014 0018 0025 0033 0047 0060 0075 0085 0115 0145 0180 0215 0283 0346 0415
Maximum Applicable Motor Capacity
(HP) <1>
2 3 4
3.7
(5)
7.5 10 15 20 25 30 40 50 60 75 100 125 150
Input
Input Current (A) <2> 7.5 11 15.6 18.9 28 37 52 68 80 82 111 136 164 200 271 324 394
Rated Voltage
Rated Frequency
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc <3>
Allowable Voltage
Fluctuation
-15 to 10%
Allowable Frequency
Fluctuation
±5%
Input Power (kVA) 4.1 5.8 7.8 9.5 14 18 27 36 44 37 51 62 75 91 124 148 180
Output
Rated Output Capacity
(kVA)
<4>
3
<5>
4.2
<5>
5.3
<5>
6.7
<5>
9.5
<5>
12.6
<5>
17.9
<5>
23
<5>
29
<5>
32
<5>
44
<5>
55
<6>
69
<6>
82
<6>
108
<6>
132
<6>
158
<6>
Rated Output Current (A)
8
<5>
11
<5>
14
<5>
17.5
<5>
25
<5>
33
<5>
47
<5>
60
<5>
75
<5>
85
<5>
115
<5>
145
<6>
180
<6>
215
<6>
283
<6>
346
<6>
415
<6>
Overload Tolerance 150% of rated output current for 60 s
Carrier Frequency User adjustable between 2 and 15 kHz
User adjustable between 2 and
10 kHz
Maximum Output Voltage
(V)
Three-phase 200 to 240 V (proportional to input voltage)
Maximum Output Speed (Hz) 200 Hz (user-set)
TOEP_C710616_38F_5_0.book 159 ページ ２０１３年１２月４日 水曜日 午前９時５６分