E5: pm motor settings, B parameter table – Yaskawa CIMR-LU Drives User Manual

Page 177

Advertising
background image

B Parameter Table

YASKAWA ELECTRIC TOEP C710616 38F YASKAWA AC Drive L1000A Quick Start Guide

177

Par

ame

te

r Ta

ble

B

E5: PM Motor Settings

No.

Name

Description

Setting

E5-02

<1>

<1> Parameter setting value is not reset to the default value when the drive is initialized.

<4> Default setting value is determined by the drive model (o2-04).

<10> The display resolution depends on the rated output power of the drive. Models CIMR-LU2A0008 to 2A0033, 4A0005 to 4A0018, and 5A0003

to 5A0013 display values in 0.01 A units, while models CIMR-LU2A0047 to 2A0415, 4A0024 to 4A0605, and 5A0017 to 5A0200 display

values in 0.1 A units.

<43> When PG-E3 option connected: Max setting = 48

Motor Rated Power

Sets the rated capacity of the motor.

Default:

<4>

Min: 0.10 kW
Max: 650.00 kW

E5-03

<1>

Motor Rated Current

Sets the motor rated current.

Default:

<4>

Min: 10% of drive
rated current
Max: 200% of
drive rated
current

<10>

E5-04

<1>

Number of Motor Poles

Sets the number of motor poles.

Default: 12
Min: 2
Max: 120

<43>

E5-05

<1>

Motor Stator Resistance
(Single Phase)

Sets the stator resistance (1 phase value).

Default:

<4>

Min: 0.000

Ω

Max: 65.000

Ω

E5-06

<1>

Motor d-Axis Inductance

Sets the d-axis inductance.

Default:

<4>

Min: 0.00 mH
Max: 600.00 mH

E5-07

<1>

Motor q-Axis Inductance

Sets the q-axis inductance.

Default:

<4>

Min: 0.00 mH
Max: 600.00 mH

E5-09

<1>

Motor Induction Voltage
Constant 1

Sets the induced phase peak voltage in units of 0.1 mV (rad/s) [electrical angle].
When setting this parameter, E5-24 should be set to 0.0.

Default:

<4>

Min:
0.0 mV/(rad/s)
Max:
6500.0 mV/(rad/s)

E5-11

Encoder Offset

Sets the offset between the rotor magnetic axis and the encoder zero position. Set
during Encoder Offset Tuning.

Default: 0.0 deg
Min: -180 deg
Max: 180 deg

E5-24

Motor Induction Voltage
Constant 2

Sets the induced phase-to-phase rms voltage in units of 0.1 mV/(r/min) [mechanical
angle].
When setting this parameter, E5-09 should be set to 0.0.

Default:
0.0 mV/(r/min)

Min:
0.0 mV/(r/min)

Max:
6500.0 mV/(r/min)

TOEP_C710616_38F_5_0.book 177 ページ 2013年12月4日 水曜日 午前9時56分

Advertising