Yaskawa CIMR-LU Drives - Manual (Page 32)

3 Electrical Installation
32 YASKAWA ELECTRIC TOEP C710616 38F YASKAWA AC Drive L1000A Quick Start Guide
Models CIMR-LU2A0085 to 2A0415, 4A0045 to 4A0605, and 5A0032 to 5A0200
1. Remove the terminal cover and the digital operator.
2. Loosen the installation screw on the front cover.
3. Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 19
Figure 19 Remove the Front Cover (Models CIMR-LU2A0085 to 2A0415, 4A0045 to 4A0605, and 5A0032 to 5A0200)
4. Unhook the left side of the front cover then swing the left side towards you as shown in Figure 20 until the cover
comes off.
Figure 20
Figure 20 Remove the Front Cover (Models CIMR-LU2A0085 to 2A0415, 4A0045 to 4A0605, and 5A0032 to 5A0200)
Reattaching the Front Cover
Models CIMR-LU2A0008 to 2A0075, 4A0005 to 4A0039, and 5A0003 to 5A0027
Reverse the instructions given in Remove the Front Cover (Models CIMR-LU2A0008 to 2A0075, 4A0005 to 4A0039,
and 5A0003 to 5A0027) on page 31 to reattach the front cover. Pinch inwards on the hooks found on each side of the
front cover while guiding it back into the drive. Make sure it clicks firmly into place.
Hook Hook
Front cover
installation screw
Free hooks on both
sides of the cover
TOEP_C710616_38F_5_0.book 32 ページ ２０１３年１２月４日 水曜日 午前９時５６分