The drive and programming modes, Changing parameter settings or values, 4 start-up programming & operation – Yaskawa CIMR-LU Drives User Manual
Page 61
4 Start-Up Programming & Operation
YASKAWA ELECTRIC TOEP C710616 38F YASKAWA AC Drive L1000A Quick Start Guide
61
S
tart-U
p
Prog
rammin
g
&
Op
er
at
io
n
4
◆ The Drive and Programming Modes
The drive has a Drive Mode to operate the motor and a Programming Mode to edit parameter settings.
Drive Mode: In Drive Mode the user can operate the motor and observe U Monitor parameters. Parameter settings cannot
be edited or changed when in Drive Mode.
Programming Mode: In Programming Mode the user can edit and verify parameter settings and perform Auto-Tuning.
The drive will not accept an Up/down command when the digital operator is in the Programming Mode unless parameter
b1-08 is set to 1 to allow an Up/down command.
■
Changing Parameter Settings or Values
This example explains changing C1-02 (Deceleration Ramp 1) from 1.50 seconds (default) to 2.50 seconds.
Step
Display/Result
1.
Turn on the power to the drive. The initial display appears.
2.
Press
or
until the Parameter Setting Mode screen appears.
3.
Press
to enter the parameter menu tree.
4.
Press
or
to select the C parameter group.
5.
Press
two times.
6. Press
or
to select the parameter C1-02.
7.
Press
to view the current setting value (1.5 s). The left most digit flashes.
8.
Press
,
or
until the desired number is selected. “1” flashes.
9.
Press
and enter 0020.0.
- MODE -
U1-01= 0.00%
U1-02= 0.00%
U1-03= 0.00A
DRV
Speed Ref (OPR)
Rdy
RSEQ
LREF
FWD
FWD/REV
HELP
- MODE -
PRG
DATA
Programming
FWD
←
→
-PRMSET-
Initialization
Select Language
PRG
FWD
A
1-00=
0
←
→
-PRMSET-
Basic Setup
Accel Ramp 1
PRG
FWD
C
1-01 =
1.50 sec
←
→
-PRMSET-
Accel/Decel
Accel Ramp 1
PRG
FWD
C
1
-01=
1.50 sec
-PRMSET-
C1-
01
= 1.50 sec
(0.0~600.00)
“1.50 sec”
PRG
Accel Ramp 1
←
→
FWD
φ
ψ
-PRMSET-
C1-
02
= 1.50 sec
(0.0~600.00)
“1.50 sec”
PRG
Decel Ramp 1
FWD
-PRMSET-
C1-02=
0
01.50 sec
(0.0~600.00)
“1.50 sec”
PRG
Decel Ramp 1
←
→
FWD
F1
left
F2
right
-PRMSET-
C1-02=00
1
.50 sec
(0.0~600.00)
“1.50 sec”
PRG
Decel Ramp 1
←
→
FWD
-PRMSET-
C1-02=00
2
.50 sec
(0.0~600.00)
“1.50 sec”
PRG
Decel Ramp 1
←
→
FWD
TOEP_C710616_38F_5_0.book 61 ページ ２０１３年１２月４日 水曜日 午前９時５６分