Omron HOME SECURITY SYSTEM - MOTION SENSOR FQM1-MMA21 User Manual
Page 360
337
System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations
Appendix C
A562
00
Analog Output 1
Flags
User Adjustment Com-
pleted
Initial value is 0.
Set to 1 if user performs offset/gain adjustment and
Returns to factory default setting of 0 if adjustment
value is cleared.
Module
01 to 03
Reserved
---
04
Operating
ON: ON while the analog output is being changed by
ACC(888).
OFF: Turned OFF when target value is reached.
05 to 07
Reserved
---
08
Output SV Error
ON: ON when the output SV setting is outside of the
allowed setting range.
OFF: OFF when the output SV is within range.
Note Only for END refresh.
09 to 11
Reserved
---
12
Factory Adjustment Value
Error
ON: ON when the factory-set data stored in flash
memory is invalid.
OFF: OFF when the factory-set data stored in flash
memory is normal.
13
Reserved
---
14
User Adjustment Value
Error
ON: ON when the user-set adjustment value stored
in flash memory is invalid.
OFF: OFF when the user-set adjustment value
stored in flash memory is normal.
15
Reserved
---
A563
00
Analog Output 2
Flags
User Adjustment Com-
pleted
Same as for Analog Output 1 Flags.
01 to 03
Reserved
04
Operating
05 to 07
Reserved
08
Output SV Error
09 to 11
Reserved
12
Factory Adjustment Value
Error
13
Reserved
14
User Adjustment Value
Error
15
Reserved
Address
Bits
Name
Function
Controlled
by