Feedback devices – Rockwell Automation 1336T FORCE Series B User Manual
Page 17
Advertising
Chapter 1
Introduction
1–5
•
Output Frequency Range: 0 – 250 HZ
•
Output Waveform: Sinusoidal (PWM)
•
Max. Short Circuit Current Rating : 200,000A rms symmetrical,
600 volts (when used with specified AC input line fuses as detailed
in Table 2.A).
•
Ride Through: 2 seconds minimum
•
Efficiency: 97.5% at rated amps, nominal line volts
Feedback Devices
•
Encoder: Incremental, dual channel; 12 volts, 500mA,
Supply, 5/12 Volt 10ma Min Inputs, isolated with
differential transmitter, 102.5 KHz max.
Quadrature: 90
°
±
27
°
@ 25
°
C, Duty Cycle: 50% + 10%.
•
Speed Regulation with Encoder Feedback: 0.001% of Top Speed
over a 100:1 Speed Range.
Encoderless Speed Regulation: 0.5% of Top Speed over a 40:1 Speed
Range.
Advertising