Rockwell Automation 1336T FORCE Series B - Manual (Page 2)

Important User Information Because of the variety of uses for the product described in this publication,
those responsible for the application and use of this control equipment
must satisfy themselves that all necessary steps have been taken to assure
that each application and use meets all performance and safety
requirements, including any applicable laws, regulations, codes and
standards.
The illustrations, charts, sample programs and layout examples shown in
this guide are intended solely for purposes of example. Since there are
many variables and requirements associated with any particular
installation, Allen-Bradley Company does not assume responsibility or
liability (to include intellectual property liability) for actual use based upon
the examples shown in this publication.
Allen-Bradley publication SGI-1.1 Safety Guidelines for the Application,
Installation, and Maintenance of Solid-State Control (available from your
local Allen-Bradley office), describes some important differences between
solid-state equipment and eletromechanical devices that should be taken
into consideration when applying products such as those described in this
publication.
Reproduction of the contents of this copyrighted publication, in whole or in
part, without written permission of the Allen-Bradley Company, Inc. is
prohibited.
Throughout this manual we use notes to make you aware of safety
considerations:
!
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death, property
damage or economic loss.
Attentions help you:
•
identify a hazard
•
avoid the hazard
•
recognize the consequences
Important: Identifies information that is especially important for
successful application and understanding of the product.