Hypertherm V9 Series Phoenix Rev.11 User Manual

Page 130

Advertising
background image

130

Phoenix 9.76.0 Installation and Setup Manual 806410

4 – SERCOS setup

RECO/Beckoff I/O at Address 50: Select Yes if the Indramat RECO or Beckoff I/O module is being used to expand

the total number of I/O on the fiber optic ring.

The RECO I/O will populate the general purpose I/O (both analog and digital) following
all drive I/O.

HPR/4070 at address 60: Select Yes if the optional SERCOS interface for HPR/4070 is being used.

HTA I/O at Address 70: Select Yes if the optional Hypertherm SERCOS interface card is being used.

Advertising
This manual is related to the following products:

V9 Series Phoenix Rev.9, EDGE Pro HyPath Shape Cutting Control Rev.4, EDGE Pro Picopath Shape Cutting Control Rev.3, EDGE Pro SERCOS II Shape Cutting Control Rev.4, EDGE Pro SERCOS III Shape Cutting Control Rev.4, EDGE Pro Ti Shape Cutting Control Rev.2, MAXPRO200 Rev.2

Popular Brands
Popular manuals