Hypertherm V9 Series Phoenix Rev.11 - Manual (Page 280)

280 Phoenix 9.76.0 Installation and Setup Manual 806410
16 – Waterjet Application
Waterjet system overview
The CNC connects to the waterjet pump, cutting head, and abrasive regulator.
1
2
3
4
5
6
7
1 HyPrecision waterjet pump
2 CNC
3 Serial connection from CNC to PLC on waterjet
pump
4 Waterjet cutting head
5 Cut Control output from CNC to solenoid valve on
cutting head to turn on water flow
6 Abrasive regulator
7 Abrasive Control output from CNC to solenoid
valve on abrasive regulator to turn on abrasive flow