Hypertherm V9 Series Phoenix Rev.11 User Manual
Page 250
250
Phoenix 9.76.0 Installation and Setup Manual 806410
13 – Phoenix Link
2. Select Files > Change Master Folder.
3. To change the master file from the current folder, enter the selected path in the New Master Folder field and click OK.
4. Use the same procedure to select a master folder on a network.
For example, if the folders that contain the part programs are currently located in a folder named Jobs that is located
on the PC named R drive, the Link.exe could be configured with the Change Master folder option to access these
files.
Example path: R:\Cad\Production\Jobs
Again, start by launching the Link Software at the host computer. Select Files\Change Master Folder.
The Master file may now be changed from the current folder to the selected “Jobs” folder by typing in the path
R:\Cad\Production\Jobs. Select OK to accept the change.
The final step to setup the Link software is to configure the Link software for Port, Baud, Files and Settings to match
those being used at the CNC. It is recommended that a shortcut to the Link.exe be placed on the desktop of the host PC
for ease of use.