Hypertherm V9 Series Phoenix Rev.11 User Manual

Page 198

Advertising
background image

198

Phoenix 9.76.0 Installation and Setup Manual 806410

8 – Diagnostics

For a Picopath system, connect the brown tester to the Joystick/Speedpot port, the X/Y port and the I/O port.

3. On the Machine Interface screen, choose Test. A message informs you if the test is successful.

If the test fails, contact your OEM or system integrator to check or replace these parts in the following order:

1. Analog field interface card

2. Ribbon cable

3. Analog interface card

Advertising
This manual is related to the following products:

V9 Series Phoenix Rev.9, EDGE Pro HyPath Shape Cutting Control Rev.4, EDGE Pro Picopath Shape Cutting Control Rev.3, EDGE Pro SERCOS II Shape Cutting Control Rev.4, EDGE Pro SERCOS III Shape Cutting Control Rev.4, EDGE Pro Ti Shape Cutting Control Rev.2, MAXPRO200 Rev.2

Popular Brands
Popular manuals