Inputs – Hypertherm V9 Series Phoenix Rev.11 User Manual
Page 199
Phoenix 9.76.0 Installation and Setup Manual 806410
199
8 – Diagnostics
I/O
Inputs
This test continuously monitors and displays the state of all of the optically-isolated discrete inputs in the CNC. The
current state of each input, ON or OFF, is displayed next to the input name. You can also use a Watch Window to monitor
selected inputs.
You can change the name of inputs that are displayed with a white background. To change the input name, use the
Previous/Next arrow key to highlight the input and type the new input name. The input can be connected to the CNC and
used as commanded in the part program. For example, the EIA W7 S1 code pauses the program and waits for input 7 to
become active.
To open the I/O diagnostics screen, choose Setups, Diagnostics, I/O, and enter the Machine password.
Note: The number and name of the inputs depends on the CNC software and hardware configurations.