Hypertherm V9 Series Phoenix Rev.11 - Manual (Page 37)

Phoenix 9.76.0 Installation and Setup Manual 806410 37
Section 1
System Tools
Introduction
The Phoenix software offers a suite of tools for performing system-level tasks such as backing up the CNC hard drive and
connecting the CNC to a network. To access the Phoenix system tools, choose Setups > Password > Special Setups
> System.
Before you begin, connect a mouse and keyboard to the CNC to use System Tools.
CAUTION
Using the System Tools requires operational knowledge of the Windows ® operating system
and should only be performed by qualified personnel.