H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 104)

91
Displaying RMON event logs
1. Select Device > RMON from the navigation tree.
2. Click the Log tab.
The Log tab page appears and displays log information for all event entries.
Figure 72 Log
RMON configuration example
Network requirements
As shown in Figure 73 , Agent is connected to a remote NMS across the Internet. Create an entry in the
RMON Ethernet statistics table to gather statistics on GigabitEthernet 1/0/1, and perform
corresponding configurations so that the system will log the event when the number of bytes received on
the interface exceed the specified threshold.
Figure 73 Network diagram for RMON
Configuration procedure
1. Configure RMON to gather statistics for interface GigabitEthernet 1/0/1.
a. Select Device > RMON from the navigation tree.
The Statistics tab page appears.
b. Click Add.
The page in
Figure 74 appears.
c. Select GigabitEthernet1/0/1 from the Interface Name list and enter user1-rmon in the Owner
field.
d. Click Apply.