H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 255)

242
Figure 217 Configure a default route
2. Configure a static route to Switch A and Switch C respectively on Switch B:
a. After you log in to the Web interface of Switch B, select Network > IPv4 Routing from the
navigation tree.
b. Click the Create tab.
c. To configure a static route to Switch A and Switch C respectively on Switch B:
{
Type 1.1.2.0 for Destination IP Address.
{
Type 24 for Mask.
{
Type 1.1.4.1 for Next Hop.
d. Click Apply.