H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 260)

247
Figure 222 Configure a static route
e. Perform the following settings:
{
Type 3:: for Destination IP Address.
{
Select 64 from the Prefix Length list.
{
Type 5::1 for Next Hop.
f. Click Apply.
3. Configure a default route to Switch B on Switch C:
a. After you log in to the Web interface of Switch C, select Network > IPv6 Routing from the
navigation tree.
b. Click the Create tab.
c. To configure a default route to Switch B on Switch C:
{
Type :: for Destination IP Address.
{
Select 0 from the Prefix Length list.
{
Type 5::2 for Next Hop.
d. Click Apply.