H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 201)

188
Configuring LLDP settings on ports individually
1. Select Network > LLDP from the navigation tree to enter the Port Setup tab, as shown in Figure
165 .
2. Click the icon for the port you are configuring.
On the page displayed as shown in Figure 166 , you can modify or view the LLDP settings of the
port.
Figure 166 The page for modifying LLDP settings on a port
3. Configure LLDP settings on the port as described in Table 61 .
4. Click Apply.
Table 61 Configuration items
Item Description
Interface Name Display the name of the port or ports you are configuring.
DLDP State
Display the LLDP enabling status on the port you are configuring.
This field is not available when you batch-configure ports.