H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 162)

149
Configuration procedure
1. Create VLAN 2:
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter 2 for VLAN IDs, as shown in Figure 136 .
d. Click Create.
Figure 136 Create VLAN 2
2. Configure GigabitEthernet 1/0/1 as a hybrid port and configure its default VLAN as VLAN 2:
a. Select Device > Port Management from the navigation tree.
b. Click the Setup tab.
c. To configure GigabitEthernet 1/0/1 as a hybrid port and configure its default VLAN as VLAN
2:
{
Select Hybrid from the Link Type list.
{
Select the PVID option and enter 2 in the field.
{
Select GE1/0/1 from the chassis front panel.
d. Click Apply.